Australian scientists have produced a new high-speed welding technology that slashes hours from traditional joining of corrosion-resistant metals. The Keyhole Welding process has been developed jointly by the Cooperative Research Centre for Welded Structures and CSIRO Elaborately Transformed Metals at Woodville, Adelaide, Australia. CSIROâs Dr Ted Summerville says: “This is a breakthrough, high-quality solution to the limited penetration of conventional TIG welding. The new process combines high welding currents and novel torch design to give a process that can punch through 12 mm plate with ease.” Dr Summerville says: “A keyhole is formed in the molten metal produced by the arc, and this keyhole then anchors to both the front and root faces of the plate, rendering it very stable. This, and the fact that the arc gases can now pass cleanly through the material, make the process highly reproducible and very robust.”
“These are major bonuses when welding corrosion-resistant metals such as stainless steel and titanium. This new process can be used for welding all types of stainless steel, C-Mn steel and titanium alloys,” Dr Summerville says. “Single pass welding speeds vary with the thickness being welded, for example 12 mm plate is typically welded at 300 mm per minute, 8 mm plate at 500 mm per minute and 3 mm plate at 1000 mm per minute. Welding stainless steel and titanium, which previously took hours, can now be automated and completed in minutes.â?
