titanium Archives - Page 8 of 39 - Stainless Steel World

What is Titanium?

Titanium is a chemical element with the symbol Ti and atomic number 22. It is a lustrous transition metal known for its high strength, low density, and corrosion resistance. It is widely used in various industries, including aerospace, medicine, and sports equipment, due to its exceptional properties.

Titanium vs stainless steel?

Titanium and stainless steel are both popular materials, but they have distinct characteristics. Titanium is significantly lighter than stainless steel, has higher strength-to-weight ratio, and excellent corrosion resistance. Stainless steel, on the other hand, is heavier, has better hardness, and can withstand higher temperatures. The choice between the two depends on specific requirements like weight, strength, and environmental conditions.

Lamprell to build Seajacks jackup rig

Stainless Steel World Publisher - July 23, 2012

Lamprell has received a USD 120.9 million contract award from Seajacks 4 to supply it with a jackup rig. The engineering, procurement and construction contract is for the design, construction and delivery of a Seajacks-modified Gusto MSC NG 2500X self-elevating and self-propelled jackup rig.

President of ExxonMobil Refining Co. to retire

Stainless Steel World Publisher - July 20, 2012

S.J. (Sherman) Glass, Jr., president, ExxonMobil Refining & Supply Company, and vice president, Exxon Mobil Corporation has elected to retire on 1 August 2012, after over 40 years of service. It is anticipated that the board of directors of Exxon Mobil Corporation will appoint D.W.

Electralloy materials build super submarine

Stainless Steel World Publisher - July 20, 2012

Arguably the world's most advanced fast attack nuclear submarine, the USS Mississippi was officially commissioned to the United States Navy.

Aker Solutions to build MEG reclamation plant

Stainless Steel World Publisher - July 18, 2012

Aker Solutions has won a contract by Technip to supply a Mono Ethylene Glycol (MEG) reclamation plant for the Ichthys LNG Project in Australia.

Outokumpu LDX 2101® receives EAM standard

Stainless Steel World Publisher - July 9, 2012

Outokumpu LDX 2101® material has been officially approved for use when building pressure equipment. Fabricators can refer to the European Approval of Material (EAM) to show conformity with the European Pressure Equipment Directive (PED) when using flat LDX 2101® ≤10 mm.

TIFAST invests in a Titanium VAR furnace

Stainless Steel World Publisher - July 6, 2012

Tifast, the new European Titanium producer of bars, wires, ingots and slabs, started a new investments program including an 8 tons VAR melting furnace, some bars finishing lines, an IT system from SAP and the aerospace NADCAP certification. The combination of 3 melting furnaces, a SIEMENS rolling mill for bars and wires, the certifications ISO 9001, EN 9100, TUV ADWO and an experienced team will allow Tifast to be the right partner for your titanium needs in aerospace, medical and industrial.

Shipbuilding growth boosts steel consumption

Stainless Steel World Publisher - July 4, 2012

Arab Steel reported that a boost in orders for new ships and offshore oil rigs in 2012 will result in greater steel consumption at two of the largest shipbuilding yards in the Gulf Cooperation Council.

Nippon Pipeline & Sumitomo Pipeline merger

Stainless Steel World Publisher - July 4, 2012

Nippon Steel Pipeline Co., Ltd. and Sumitomo Metal Pipeline and Piping, Ltd. have agreed to merge on 1 October 2012.

The Carlyle Group, Sunoco to form JV

Stainless Steel World Publisher - July 3, 2012

Global alternative asset manager The Carlyle Group L.P. and Sunoco, Inc. have agreed to form Philadelphia Energy Solutions, a joint venture that will enable the historic Philadelphia refinery to continue operating.

Bombardier makes massive investment

Stainless Steel World Publisher - June 27, 2012

Bombardier Aerospace has signed an agreement with Midparc Investment S.A., a Moroccan property holding and management company, to purchase land required for its new plant in the Midparc Casablanca Free Zone, in Nouaceur. Bombardier intends to invest approximately USD 200 million in equipment, buildings and start-up costs over the next eight years.

1...789...39 Page 8 of 39

How does titanium compare with stainless steels?

Titanium and stainless steel are commonly used metals, but they have notable differences. Titanium is much lighter than stainless steel, with a density about half that of steel. Titanium also boasts a higher strength-to-weight ratio, making it ideal for applications where weight reduction is critical, such as aerospace components. It exhibits excellent corrosion resistance, even in harsh environments, while stainless steel can corrode under certain conditions. However, stainless steel generally surpasses titanium in terms of hardness, durability, and the ability to withstand higher temperatures. Stainless steel offers a wider range of options, including different grades with varying corrosion resistance and strength characteristics. The choice between titanium and stainless steel depends on specific requirements such as weight, strength, corrosion resistance, and operating conditions.

Applications for Titanium

Titanium’s exceptional properties make it suitable for various applications. It is extensively used in the aerospace industry for aircraft components, including airframes, engine parts, and landing gears. Its corrosion resistance and biocompatibility make it valuable for medical implants, such as joint replacements and dental implants. Titanium is also employed in sports equipment, eyewear frames, high-performance bicycles, and automotive components. Its non-magnetic nature finds applications in sensitive electronic devices. Additionally, it is used in chemical processing, desalination plants, and marine environments due to its resistance to corrosion.

Tag: titanium