Vic-Press creates rigid, permanent, leak-tight joints in seconds. Pipe is cut to length and deburred, marked for visual verification of full insertion, then inserted into a coupling or fitting. A handheld pressing tool is used to compress the coupling/fitting onto the pipe-end. Patent-pending press-detection technology enables the installer to identify unpressed joints as the system is filled and tested. The Vic-Press system works with Schedule 10S Type 316 stainless steel pipe. The approved Vic-Press product range includes couplings, tees, elbows, reducers, end caps and adapters in sizes ranging from ½” to 2” (15mm to 50mm), with a maximum pressure rating of 232 psi (16 bar). Gasket materials are available in HNBR, EPDM and fluoroelastomer (BV and DNV only).
