Since many years Certex Lifting & Service plans, develops and realizes successfully Special solutions in load and lifting technology. As a competent and flexible partner the industry, the Certex team of engineers has lifting know-how in almost all Industrial sectors. For a special project, a turning traverse was used for the horizontal turning of sharp-edged components of different lengths.
Battery-powered drive – no power required from crane. The technical challenge lies in using the turning traverse to carry out the work.to improve the process. Battery operated; a frequency converter provides a gentle.
Start of rotation and infinitely variable speed control. The rotation speed is 1 to 4 revolutions per minute. With this solution, safer and faster operations can be achieved. With a double single-strand chain suspension, the cross beam can be attached to a single or double hooks can be attached.
The turning traverse is suitable for large work-piece lengths up to 8 m and weights up to 1.5 t. is laid out. Two rubberized rollers with compartments on the traverse sides allow for good torque transmission to the lifting straps. With the PU-coated belts, the sharp-edged work-pieces are reliably turned around. The flexible load is attached to four lifting straps. Lifting belt widths from 30 mm to 80 mm can be used.